Gsm Android Tool

MTK Auth Bypass Tool V61 – MTK Meta Utility Tool

Download MTK META Utility V61 MTK AUTH Bypass Tool Update

MTK Auth Bypass Tool V61 (MTK Meta Mode Utility) is a free software for windows that lets you disable DAA and SLA Auth (Secure Protection for boot) Protection) on any MediaTek MTK-powered device quickly.

Mtk auth bypass tool v61 – mtk meta utility tool

Nowadays, each Android phone comes with USB security to prevent third-party flashing and abuse on the part of users. Unstocking or even flashing the phone without a legal tool or authorization is impossible. In this case, you’ll need you can use the MediaTek MTK Secure Boot Disable Software will aid you in bypassing the security of your auth phone.

Changelog (06-10-2022)!! !

To Samsung MTK devices equipped with (MT6739/W/WW) chipsets that are unable to leave B-Rom using (MTK META Utility) such as:

– Samsung Galaxy A02 (SM-A022F, SM-A022F/DS, SM-A022M, SM-A022M/DS, SM-A022G, SM-A022G/DS).

– Samsung Galaxy M02 (SM-M022F, SM-M022F/DS, SM-M022G, SM-M022G/DS).

– Samsung Galaxy A01 Core (SM-A013F, SM-A013F/DS, SM-A013G, SM-A013G/DS, SM-A013M).

Samsung Galaxy M01 Core (SM-M013F, SM-M013F/DS)

The answer is to download the appropriate firmware that has the same BIT revision and extract using (MTK META Utility) Then, go to the B-Rom tab, choose (Write BOOT_SECTION LUN0/BOOT1) and then choose the preloader you have extracted (the large one that has 4 MB) done.

Please don’t attempt to flash with different tools as it may damage (P-GPT) area during flashing and may fail to create a compatible Samsung particular (P/S-GPT).

If this happens and you cannot fix the issue using other tools, disable auth and flash using SPFT alone (PRELOADER and LK & EFUSE) from your extracted firmware.

The reason is that these chipsets (MT6739/MT6757) are pretty old (chip controllers, which are quad-core processors are built on the Cortex A53 architecture) and don’t support the dump eMMC_CID command; therefore, it isn’t able to find the preloader that is compatible automatically.

Mtk auth bypass tool v61 – mtk meta utility tool

Features MTK META UTILITY Tool:-

  • MTK Brom Mode:
  • – Disable Auth
  • – Dump Preloader
  • – Crash Preloader
  • – Crash Preloader To Brom
  • – Samsung MTK Force Brom (DM)
  • – Samsung MTK Exit Brom
  • – Samsung MTK Rebuild PMT (DM)
  • – FRL-L22 Y9A Force Brom
  • – Reboot Meta
  • – Reboot AT Mode
  • – Reboot Factory Mode
  • – Reboot Fastboot Mode
  • VIVO New SEC Read information (FM)
  • – Analyze MTKA DA
  • – Analyze Preloader

META Mode:

MTK META MODE UTILITY – META MODE

  • – Read Meta Info
  • – Read Part (META)
  • – Format Part (Meta)
  • – Write Part (Meta)
  • – Dump MDDB/APDB (META)
  • – DUMP NV Regions (META)
  • Dump User area (Meta)
  • – Dump PGPT (Meta)
  • – Dump EXT_CSD (META)
  • – EMMC Health Check (META)
  • – Factory Reset – META
  • – Factory Reset – META 2
  • – Gen FRP Reset PKG (META)
  • – Read NVRAM
  • – Wipe NVRAM
  • – Write NVRAM
  • – Unlock Network
Mtk auth bypass tool v61 – mtk meta utility tool

Android Mode:

MTK META MODE UTILITY – ANDROID

  • – Read ADB Info
  • – Read Fastboot Info
  • – Exit Fastboot Mode
  • – Xiaomi Enable Diag (ADB)
  • – Install APK (ADB)
  • – Disable the Payjoy APP (ADB)
  • – Generic ADB FRP Bypass
  • – Generic Fastboot Factory Reset
  • – Generic Fastboot FRP Wipe
  • – Wipe NVRAM_NVDATA (Fastboot)
  • – Extract Super IMG
  • – Extract OFP (MTK + QCOM)
  • – Extract Samsung ROM (MTK)
  • – Extract Huawei UPDATE (MTK)
  • – Extract OnePlus ROM (.ops)
  • – Extract LG ROM (.kdz)
  • – Extract RedMagic (payload.bin)

Extra Features:

MTK META UTILITY – EXTRA

  • – Samsung Reboot to Download Mode
  • – Samsung Read Info Download Mode
  • – Samsung Factory Reset (MTP)
  • – Samsung Activate ADB (MTP)
  • – Huawei Fastboot To Upgrade
  • – Huawei Normal To Upgrade
  • – VIVO Demo Remove (AT)
  • – VIVO Demo Remove (MT6877T)
  • – PGPT to Scatter
  • – Scatter to PGPT
Mtk auth bypass tool v61 – mtk meta utility tool

SAMSUNG Features:-

MTK META UTILITY – SAMSUNG

  • – Samsung MTK Force BRom (DM)
  • – Samsung MTK Exit BRom (FM)
  • – SM-A326U (A32 5G) BIT7 Fix Dead Brick
  • – SM-A037F KG Locked Force Brom (DM)
  • – Samsung Read Info (DM)
  • – Samsung Reboot to (DM)
  • – Samsung Activate ADB (MTP)
  • – Samsung Factory Reset (MTP)
  • – Samsung changed (SEC CTRL FLAG) to (-1)

Supported CPUs:

  • MT6572
  • MT6580
  • MT6582
  • MT6592
  • MT6595
  • MT6735
  • MT6737
  • MT6739
  • MT6753
  • MT6755
  • MT6750
  • MT6750M
  • MT6750T
  • MT6750S
  • MT6757
  • MT6761
  • MT6762
  • MT3369
  • MT8766B
  • MT6763
  • MT6765
  • MT6768
  • MT6771
  • MT6779
  • MT6785
  • MT6795
  • MT6797
  • MT8127
  • MT8163
  • MT8516
  • MT8173
  • MT8695
  • MT6873
  • MT6799
  • MT8590
  • MT6781
  • MT6768
  • MT6883
  • MT6885
  • MT6889
  • MT6833
  • MT6853
  • MT6853V
  • MT6873
  • MT6891Z
  • MT6893
  • MT8765WB
  • MT8385
  • MT8183
  • MT8666
Mtk auth bypass tool v61 – mtk meta utility tool

Changelog!!!

MTK META Utility V61:

• Added LG DKZ direct (Extract/Decrypt) to raw images.

Supported KDZ formats and types:

– LGE KDZ v1 – v2 – v3 (MediaTek & Qualcomm).

Z-Library compression (Zlib) is the default.

Z-Standard compression (zstd) is a lossless high-speed compressing algorithm (other tools don’t support this type of compression very well).

Extraction will now be too raw images that are default,

scatter creation and (merge/combine) sparse (system/vendor/product/super) files,

Multiple chunks are to be added to the version.

You could still do it manually.

Transform pgpt. img to scatter, and then add items to the scatter file

The preloader extracts IMG from the raw preloader and then uses ext4_tools (merge/combine) the additional chunks.

A selection of the files tested :

– LG K51 (K500MM10f_00_MPCS_US_OP_0610.kdz)

– LG K61 (Q630HA20a_00_OPEN_SCA_OP_1229.kdz)

– LG Stylo 6 (Q730MM10l_00_MPCS_US_OP_0908.kdz)

– added (Extract/Split) IMG preloader from BOOT_REGION. Convert to a flash-capable preloader

Types supported by eMMC and UFS include Preloader (EMMC_BOOT and UFS_BOOT, as well as COMBO_BOOT)

I would like to know what (low-level) tasks could be helpful if included in the following versions. We welcome any (requests and recommendations) regarding the extraction of firmware packages. Please let us know if you are using any encrypted file format that needs to be extracted for servicing mobile phones only.

– Software GUI Enhanced and improved compatibility with almost all screens

Developers can request (QT/C+) source code to implement the extraction algorithm.

The software is provided “as is” without implied or express warranty.

In no case can the creators be held accountable for any harm resulting from the use of this program. It is intended for legal service and maintenance on mobile phones and should not be used for any illegal purpose.

Download Link:: Link

About the author

Rshoaibm2